Advertisement
Setup / Mounting Instructions
Choose a location to hang the dartboard where there is about 10 feet of open space in front
of the board. The "toe-line" should be 7' 9 1/4" from the face of the dartboard
. Locate a wall stud and place a mark 76.75" from the floor.
Insert a screw in the center of
the wall stud at this height and hand the dartboard on this screw
If not mounting into studs, be sure to use drywall anchors or other securing hardware
appropriate to the wall you are using.
If you want to mount the dartboard even more securely to the wall, you can fasten four
screws (not included) through the holes located in the catch ring area (the area outside the
scoring segments). This will secure the board to the wall
Center of bullseye should be 5' 8" from the ground.
Plug the A/C adapter (if provided, some models are battery powered) into the wall outlet and
into the jack at the bottom right of the dartboard and you're ready to play.
Dartboard Functions
POWER button - Located on the lower right corner of the dart board . Be sure the AC
Adapter is plugged into the jack on the right side of the dartboard. Press the POWER button
to turn game on or off.
GAME GUARD button – Press to activate Game Guard Feature
SOUND button – Press to set desired volume level or to mute.
DOUBLE/MISS button - This button is used to activate the Double In/Double Out and Master
Out options for the "01" games. This function is only active when selecting 301, 401, etc.
games. The MISS feature is active during play of any game. Press button to register a
"missed" dart. Player can press this button when dart lands outside target area so computer
registers a thrown dart.
DART-OUT/SCORE button - The dart-out feature is active only during the "01" games (301,
401, etc.). When a player's score falls below 160, he/she can press the DART OUT button
to get a suggestion from the dartboard as to the 3 darts needed to finish the game. Note:
doubles and triples are indicated with 2 and 3 dashes to the left of the number respectively.
The SCORE feature allows player to access score not current on display.
Advertisement
