1. Manuals
  2. Brands
  3. Tacony Manuals
  4. Floor Machine
  5. Powr-Flite NM1600
  6. Operator's manual

Tacony Powr-Flite NM1600 Operator's Manual

1600 rpm ultra high speed burnisher
Hide thumbs Also See for Powr-Flite NM1600:
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
OPERATOR'S MANUAL
Ultra High Speed Burnisher
Model NM1600
1600 RPM
WARNING: OPERATOR MUST READ AND UNDERSTAND THIS MANUAL
COMPLETELY BEFORE OPERATING THIS EQUIPMENT.
©
Tacony, Inc., All rights reserved
X8442A16 05/2021
Save These Instructions

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Powr-Flite NM1600 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Tacony Powr-Flite NM1600

Summary of Contents for Tacony Powr-Flite NM1600

  • Page 1 OPERATOR’S MANUAL Ultra High Speed Burnisher Model NM1600 1600 RPM WARNING: OPERATOR MUST READ AND UNDERSTAND THIS MANUAL COMPLETELY BEFORE OPERATING THIS EQUIPMENT. © Tacony, Inc., All rights reserved X8442A16 05/2021 Save These Instructions...
  • Page 2 Your new Powr-Flite Ultra High Speed Burmisher will afford you many years of trouble-free operation saitisfaction provided it is given proper care. All parts used in the manufacturing of this unit have passed rigid quality control standards prior to assembly. Please safeguard the original receipt / invoice.

  • Page 3: Grounding Instructions

    GROUNDING INSTRUCTIONS This appliance must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This machine is equipped with a cord having an equipment -grounding conductor and grounding plug. The plug must be inserted into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

  • Page 4: Important Safeguards

    With the handle locked, tip the machine back UNCRATING until the handle is lying flat on the floor Your Powr-Flite Ultra High Speed Burnisher To remove the pad-lock pad holder from the was protectively packed to prevent damage flexible pad driver, grasp the center support in shipment.

  • Page 5: After Using The Machine

    Fig 2 Fig 3 HOW TO OPERATE THE MACHINE Plug the machine in as directed and lower the Safety handle to the desired operating height. Push Switch the safety switch forward (see figure 4) and squeeze the switch triggers beneath the handle grips.

  • Page 6: Maintenance

    MAINTENANCE Drive Belt Adjustment (see figure 7) Once a month remove the motor cover of the unplugged NM1600 Ultra High Speed Burnisher 1. Remove the three (3) Phillips head screws by removing the motor cover screws. holding the pad center grip Vacuum out any dust or debris which has 2.

  • Page 7: Troubleshooting

    TROUBLESHOOTING Problem Possible Cause Rectifier is defective. Replace. Switch is defective. Replace. Cord is damaged. Replace. Burnisher will not start Plug is broken or has a loose contact. Replace. Circuit breaker has tripped (2000 RPM and 2000 RPM Dust Control ONLY)* Do not lift up on the handle while operating the unit.
  • Page 8 For warranty information go to www.Powr-Flite.com A Tacony Company 3101 Wichita Court • Fort Worth, TX 76140-1755 1-800-880-2913 • Fax: 1-817-551-0719 X8442A16 05/2021...

Table of Contents