Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Tacony Powr-Flite 1600 RPM C1600-3
Summary of Contents for Tacony Powr-Flite 1600 RPM C1600-3
-
Page 1: Save These Instructions
OPERATOR’S MANUAL 1600 RPM C1600-3 High Speed Burnisher WARNING: OPERATOR MUST READ AND UNDERSTAND THIS MANUAL COMPLETELY BEFORE OPERATING THIS EQUIPMENT. © Tacony Corporation, All rights reserved X9330 05/2019 Save These Instructions... - Page 2 Your new Powr-Flite High Speed Burnisher will afford you many years of trouble-free operating satisfaction provided it is given proper care. Prior to packaging, your Powr-Flite High Speed Burnisher was inspected by a Quality Control Technician. UNCRATING Your Powr-Flite High Speed Burnisher was protectively packed to prevent damage in shipment. We suggest that upon removing the unit from its carton, you carefully inspect it for any possible damage in transit.
- Page 3 This appliance must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk electric shock. This machine is equipped with a cord having an equipment -grounding conductor and grounding plug. The plug must be inserted into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
- Page 4 PREPARE THE MACHINE FOR OPERATION WARNING: To prevent injury, always remove the electrical plug from the electrical outlet before changing the polishing pad and before leaving the machine. • With the handle locked, tip the machine back until the handle is lying flat on the floor.
- Page 5 AFTER USING THE MACHINE • Upon completion, dust mop with treated mop to pick up all burnishing residue. • The condition of the floor pad has a direct affect on the performance of you burnisher. When the pad becomes dirty, turn it over and use the other side. When finished, wash the pad out and allow to dry completely before using again.
- Page 6 TROUBLESHOOTING Burnisher tends to move to the right. • Do not lift up on handle while operating the burnisher. • Do not operate with the handle set too high. Recommended handle height is from your waist with your arms extended forward. Machine will not start.
- Page 7 • Cleaning and refinishing charges or machine downtime. Rentals and other replacement machines are not available from Powr-Flite during the repair period. A Tacony Company 3101 Wichita Court • Fort Worth, TX 76140-1755 1-800-880-2913 • Fax: 1-817-551-0719...
Need help?
Do you have a question about the Powr-Flite 1600 RPM C1600-3 and is the answer not in the manual?
Questions and answers