Table of Contents
Advertisement
Installation Location Checklist
Use this checklist to ensure you have selected the correct location for the water heater.
□
The water heater is not exposed to corrosive compounds in the air.
□
The water heater location complies with the required clearances.
□
The planned combustion air and exhaust termination locations meet the required clearances.
□
The water supply does not contain chemicals or exceed total hardness that will damage the heat exchanger.
□
A standard 3 prong 120 VAC, 60 Hz properly grounded wall outlet or other 120 VAC, 60 Hz source is available.
The installation must conform with local codes or, in the absence of local codes, with the National Fuel Gas
□
Code, ANSI Z223.1/NFPA 54, or the Natural Gas and Propane Installation Code, CSA B149.1.
14
Rinnai Commercial Hybrid System Installation and Operation Manual
Advertisement
Table of Contents
