Network Status And Troubleshooting - Canon GP-2000 Online Manual

Network Status and Troubleshooting

Check the network status referring to LAN setting information on the touch screen.
Printing Network Settings
Network Status
Connected normally.
If you are unable to
print, see 1 on What
to Do.
Wi-Fi is disabled on Perform printer setup following the instructions of the manual.
the printer.
Wired LAN connec-
tion is disabled.
IP address is not as-
signed.
The default gateway Check the items below to communicate by hopping routers (e.g. using a cloud application).
is not specified.
Cannot connect to Check the status of the printer, network devices (e.g. wireless router), or smartphone/tablet.
the specified net-
work.
1. 1. If you are unable to print, check the items below:
• whether the computer is connected to Wi-Fi
• whether the firewall of your security software is enabled
• • whether a privacy separator, SSID separator, or Network separation function is ena-
bled on your wireless router
If one of the above is enabled, disable it before setup.
• whether the network name (SSID) of the printer (see "3-2-6" of network setting infor-
mation printout) matches that of the router to connect
2. To change the network connection method (wired/wireless), change it on the printer's
network setting screen.
• Make sure the printer is connected to the router with the LAN cable. •
If the LAN cable is loose, connect the cable properly.
If the LAN cable is connected to the WAN side of the router, connect the cable to the LAN
side of the router.
• Make sure the network devices (e.g. hub or router) are turned on. •
• • If you specify the printer's IP address automatically, enable DHCP on the router.
• If you specify the printer's IP address manually, the address is disabled because it is out of •
the valid range. You specified (0.0.0.0) as the IP address, for example.
Specify the valid IP address.
• • Make sure the device specified as the default gateway is turned on.
• Specify the default gateway address correctly. •
To check the default gateway, print out the network settings information.
Note
• For some printers, you can check the default gateway on the operation panel.
• If they are turned off, turn them on.
• Make sure wireless signal is strong. •
Monitor signal status and move the printer and wireless router as necessary.
• • The security key specified for the wireless router may not match that you entered.
The security key is case-sensitive.
What to Do
314