Mount The Microwave Oven; Adjust The Exhaust Adaptor; Connecting Ductwork - Frigidaire 316495064 Installation Instructions Manual

A5. MOUNT THE MICROWAVE
OVEN (cont.)
Cabinet Front
Cabinet Bottom Shelf
Microwave Oven Top
4 Attach the microwave oven to the top cabinet.
5 Insert 2 self-aligning screws
through outer top cabinet
holes. Turn two full turns on
each screw.
7
Tighten the outer two screws to the top of the
microwave oven. (While tightening screws, hold
the microwave oven in place against the wall and
the top cabinet.)
8 Install grease filters. See the Owner's Manual
packed with the microwave.
Installation Instructions
Filler Block
Equivalent
to Depth
of Cabinet
Recess
Self-Aligning Screw
6 Tighten center
screw completely.
15
A6. ADJUST THE EXHAUST
ADAPTOR
Open the top cabinet and adjust the exhaust adaptor
to connect to the house duct.
Damper
Blower Plate
A7.

CONNECTING DUCTWORK

1
Extend the house duct down to connect to
the exhaust adaptor.
2 Seal exhaust duct joints using
for high temperature applications.
Back of
Microwave
For Front-to-Back or
Side-to-Side Adjustment,
Slide the Exhaust Adaptor
as Needed
House Duct
furnance
duct tape