Connecting Your Monitor - Iiyama ProLite E2607WSD User Manual

CONNECTING YOUR MONITOR

 Ensure that both the computer and the monitor are switched off.
 Connect the computer to the monitor with the signal cable.
 Connect the monitor to the audio equipment with the Audio Cable for computer when using the
audio features.
 Connect the Power Cable to the monitor first and then to the power supply.
NOTE
NOTE  The signal cables used for connecting the computer and monitor may vary with the type of
computer used. An incorrect connection may cause serious damage to both the monitor and
the computer. The cable supplied with the monitor is for a standard 15 pin D-Sub connector.
If a special cable is required please contact your local iiyama dealer or regional iiyama
office.
 For connection to Macintosh computers, contact your local iiyama dealer or regional iiyama
office for a suitable adaptor.
 Make sure you tighten the finger screws at each end of the signal cable.
[Example of Connection]
NOTE
 Power Cable (Accessory)
 DVI-D Cable (Accessory for ProLite E2607WS and ProLite E2607WSD )
 HDMI Cable (not Supplied)
 D-Sub Signal Cable (Accessory)
Audio Cable (Accessory) Audio Cable (Accessory)

BEFORE YOU OPERATE THE MONITOR
Computer
7