NINCOAIR 365 ALUTWIN 2,4G Handbook page 5

TRANSMITTER
Indicator LED
Up / Down
ON/OFF
INSTALLATION AND BATTERY CHARGE
Transmitter:
Switch in position OFF
1.- Open the battery cover.
2.- Fit the batteries (respect polarity).
3.- Close battery cover.
Helicopter:
Switch in position OFF.
When the process finishes the LED will turn on. (Charging time approx. 90 min).
HELICOPTER FLIGHT
Before flight:
1. With the helicopter switched off, first switch on the transmitter.
2. Place the helicopter in the floor. Needed for the proper function of the gyro
3. Switch on the helicopter.
4.The LED flashes. Put the throttle stick to the top once. Ready to fly.
Trim adjustments:
1. Push again the left stick SLOWLY to start the flight (approx. between 0,5m and 1m).
2. If the tail turns left or right, please trim it using the trim button on the transmitter. Press it clockwise o vice versa until the helic o p t e r s t o p s t u r n in g.
Dual rate. User-level:
The user has Beginner (70%) or Advanced (100%) control depending on your piloting skills. Use the switch to change level. Advanced is ideal for
experienced riders. Beginner choice is recommended if it is the first flight of the user, since it is slow and progressive movements.
5
NINCOAIR is brand of NINCO DESARROLLOS S.L.
Crta. de L'Hospitalet 32
08940 Cornellà - Barcelona - Spain
CIF B-60307725 - www.nincoair.com
HANDBOOK
Forward / Backward
Left/Right
Turn trim
Dual rate
Light control
ENGLISH