LG RH16U8 VCW Series Owner's Manual page 26

OPERATION
26
2
Insert the hook of dryer rack to the drum
centre.
3
Place the dryer rack on the structure above the
lint filter and press it to complete assembly.
4
Place wet items on top of the rack. Allow space
around items for air to circulate.
• The dryer rack does not move, but the drum
will rotate.
5
Close the door.
6
Turn power on and select Rack Dry.
7
Press the Start/Pause button.
NOTE
• Check the lint filter and remove any lint
accumulated from items dried on the rack.
• The More Time / Less Time keys can be used to
finely adjust the drying time.
Damp Dry Signal
It allows that alerts you when you need to take out
clothes that are not completely dry for ironing.
1
Turn the appliance on.
2
Select a programme.
• It can be used in the following courses and
dry level.
Drying Programme
Normal
Easy Care
3
Press and hold the Rack Dry button for 3
seconds.
4
Press the Start/Pause button.
• A chime sounds for about 1 minute, when
the clothes is ready for ironing.
5
When a chime sounds, press the Start/Pause
button and open the door to take out clothes
that needs ironing.
• To continue drying remaining clothing, close
the door and press the Start/Pause button.
Using the Remote Controller
WARNING
• Do not place the remote controller in a place
where high humidity or easily splashed with
water. Doing so may cause fire or electric shock.
• Do not place the remote controller near heating
appliances, candles, cigarette butts, or etc.
Doing so may cause fire or electric shock due to
deformation.
NOTE
• It is recommended to use the remote controller
within 1.0 meter. If there is an obstacle between
the remote controller and the appliance, the
appliance may not works.
• The remote controller has a built-in magnet. Not
in use, stick the controller on the appliance. If
Dry Level
Extra / Very /
Cupboard
Cupboard