Table of Contents
Advertisement
Setting
Closed caption
Closed caption is a function that displays the audio portion
of a TV program as text on the screen. If the input signal
contains Closed captions, you can turn on the feature and
switch the channels. Press the Point ▲▼ buttons to select
Off, CC1, CC2, CC3 or CC4.
If the Closed caption is not clear, you can change the text
from Color to White.
Note:
T he Closed caption is available only under the situation
below.
• W hen the input signal is NTSC of composite and
S-video, and the system is set according to the signal
or set on Auto.
• T he system must be set on NTSC or Auto in Video
System Selection. (p.45)
• T he item of Closed caption is displayed in gray while
it is not available.
• C losed caption is unavailable when On-Screen
Menu and P-timer are displayed.
Video delay control
When you want to make a digital processing of a projected
image faster, set this function.
Use the Point ▲▼ buttons, select an item of Off/Low/Mid/
High.
Digital processing speed becomes fast by order of Low →
Mid → High. High is the fastest.
Note:
- T he following functions are not available respectively
when Video delay control is set to Low/Mid/High.
Low ... K eystone can not be selected.
Mid ... P rogressive and Noise reduction can not
be selected.
High ... K eystone, Progressive and Noise
reduction can not be selected.
- W hen Video delay control function is set to Low
or High and press the KEYSTONE button on the
remote control, Fig.1 will be displayed on the bottom
left screen about for 4 seconds.
64
Closed caption
Press the Point ▲▼ buttons to select
Off, CC1, CC2, CC3 or CC4, and
then Press Select button.
Fig .1
Video delay : On
Advertisement
Table of Contents
