Table of Contents
Advertisement
NOTE:
To reduce the risk of damage to your computer, do not force the display past 180 degrees,
and do not transport the computer while it is in slate mode.
Using the rotate button
When the computer is in slate mode, press the rotate button (on the right side of the computer) to change
the screen image to 4 different orientations. When you change the screen orientation, the top of the
screen rotates 90 degrees clockwise into the following orientations: landscape secondary (1), portrait
primary (2), landscape primary (3), and portrait secondary (4).
NOTE:
Computers with WWAN capabilities only support landscape primary (3) and portrait secondary
(4) orientations.
Using touch screen gestures
The computer allows you to use your fingers or the digitizer pen to perform certain actions on the touch
screen.
NOTE:
The instructions in this section are based on the preferences set at the factory. To modify
settings for recognized clicks and flicks, select Start > Control Panel > Hardware and Sound > Pen
and Touch.
NOTE:
Some gestures are not supported in all programs.
Tapping (or clicking)
Tap or double-tap an item on the screen as you would click or double-click with the TouchPad or an
external mouse. Tap and hold an item to see the context menu as you would with the right TouchPad
button.
NOTE:
You must tap and hold your finger until the operating system draws a circle around the area
you are touching, and then the context menu appears.
Using the touch screen
31
Hide quick links:
Advertisement
Table of Contents
