Connecting To A Wired Network - HP TouchSmart TM2-1071 User Manual

Connecting to a wired network

Connecting to a local area network (LAN) requires an 8-pin, RJ-45 network cable (purchased
separately). If the network cable contains noise suppression circuitry (1), which prevents interference
from TV and radio reception, orient the circuitry end of the cable (2) toward the computer.
To connect to a LAN:
1. Plug the network cable into the network jack (1) on the computer.
2. Plug the other end of the network cable into a network wall jack (2).
WARNING!
cable or telephone cable into an RJ-45 (network) jack.
To reduce the risk of electric shock, fire, or damage to the equipment, do not plug a modem
Connecting to a wired network 23