Switching Between Graphics Modes (Select Models Only) - HP TouchSmart TM2-1071 User Manual

Switching between graphics modes (select models only)

Your computer is equipped with switchable graphics and has two modes for processing graphics. When
you switch from AC power to battery power, the computer can switch from using the High-performance
mode to using the Power-saving mode to conserve battery life. Similarly, when you switch from battery
power to AC power, the computer can switch back to the High-performance mode.
NOTE: In some instances, in order to optimize performance of the computer, the system will not allow
you to switch modes, or it may prompt you to switch. It may also be necessary to close all programs
before switching.
NOTE: HDMI only works in the High-performance mode. If you use the Power-saving mode, you will
not be able to use HDMI.
When you switch between AC and battery power, you are notified that the computer is about to switch
graphics modes. If you prefer, you can choose to continue using the same graphics mode. While the
computer switches modes, the screen goes blank for a few seconds. When the switch is complete, a
notification appears in the notification area, and the screen image reappears.
NOTE: When select computer models are in slate mode, the screen orientations are reset when you
switch between graphics modes.
To determine which graphics mode you are using:
Right-click on the Windows desktop, and then click Configure Switchable Graphics.
▲
60 Chapter 5 Power management