Restoring Factory Settings In Computer Setup - HP ProBook 6560b Maintenance And Service Manual

NOTE:
keyboard to navigate and make selections in Computer Setup.
2. Press
To exit Computer Setup menus, choose one of the following methods:
● To exit Computer Setup menus without saving your changes:
Click the Exit icon in the lower-left corner of the screen, and then follow the on-screen instructions.
– or –
Use the tab key and the arrow keys to select File > Ignore Changes and Exit, and then press
enter.
●
To save your changes and exit Computer Setup menus:
Cclick the Save icon in the lower-left corner of the screen, and then follow the on-screen
instructions.
– or –
Use the tab key and the arrow keys to select File > Save Changes and Exit, and then press
enter.
Your changes go into effect when the computer restarts.

Restoring factory settings in Computer Setup

NOTE: Restoring defaults will not change the hard drive mode.
To return all settings in Computer Setup to the values that were set at the factory, follow these steps:
1.
Turn on or restart the computer, and then press
message is displayed at the bottom of the screen.
2.
Press
3. Use a pointing device or the arrow keys to select File > Restore Defaults.
4.
Follow the on-screen instructions.
5. To save your changes and exit, click the Save icon in the lower-left corner of the screen, and then
follow the on-screen instructions.
– or –
Use the arrow keys to select File > Save Changes and Exit, and then press enter.
Your changes go into effect when the computer restarts.
NOTE:
Your password settings and security settings are not changed when you restore the factory
settings.
124 Chapter 5 Computer Setup (BIOS) and System Diagnostics
You can use either a pointing device (TouchPad, pointing stick, or USB mouse) or the
f10 to enter Computer Setup.
f10 to enter Computer Setup.
esc while the "Press the ESC key for Startup Menu"