Table of Contents
Advertisement
may contain substances that
could
damage
the
O-rings.
[ECA11111]
PERIODIC MAINTENANCE AND ADJUSTMENT
Checking and lubricating the
cables
The operation of all control cables and
the condition of the cables should be
checked before each ride, and the ca-
bles and cable ends should be lubricat-
ed if necessary. If a cable is damaged
or does not move smoothly, have a
Yamaha dealer check or replace it.
WARNING! Damage to the outer
sheath may interfere with proper ca-
ble operation and will cause the in-
ner
cable
to
rust.
damaged cable as soon as possible
to prevent unsafe conditions.
Recommended lubricant:
Engine oil
7-23
EAU23101
Checking and lubricating the
throttle grip and cable
The operation of the throttle grip should
be checked before each ride. In addi-
tion, the cable should be lubricated by a
Yamaha dealer at the intervals speci-
fied in the periodic maintenance chart.
The throttle cable is equipped with a
rubber boot. Make sure that the boot is
securely installed. Even though the
boot is installed correctly, it does not
completely protect the cable from water
Replace
a
entry. Therefore, use care not to pour
water directly onto the boot or cable
when washing the vehicle. If the cable
[EWA10721]
or boot becomes dirty, wipe clean with
a moist cloth.
EAU23113
7
Advertisement
Table of Contents
Troubleshooting
