Removing the Hard Disk Drive
Description
Drive, hard disk (20 MB, 9.5 mm, IBM [diablo]
ATA100)
Drive, hard disk (20 MB, 9.5 mm, Toshiba ATA100)
Tray, hard disk drive
Required Equipment
#0 Phillips screwdriver.
Removal Procedure
1. Unplug the AC adapter (if present), and remove the notebook's battery.
2. Remove both hard drive retaining screws from the bottom of the notebook.
Screws,
M2.5×4mm
3. Carefully remove the hard drive from of the notebook.
4. Remove all four screws from the tray and drive case, then remove the drive from the tray.
ze1000 Series Troubleshooting and Self-Repair Guide
Table 2. Hard Disk Drive Replacement Part Numbers
Figure 8. Removing the Hard Disk Drive
Part Number
Exchange Part Number
0950-4163
F1660-69114
0950-4171
F3257-69102
F3410-60914
Removing and Replacing Parts
33