Basic Operation - Bosch CMA585GS0B User Manual

Make sure that there is no leftover packaging, ac-
1.
cessories or other objects in the cooking compart-
ment.
Close the appliance door.
2.
Use the function selector to set Hot air ⁠ ⁠ .
3.
Use the rotary selector to set the temperature to
4.
180 °C.
Press ⁠ ⁠ .
5.
a The appliance starts.

Basic operation

You can find out everything you need to know about
operating your appliance here.
Switching on the appliance
Turn the function selector to switch on the appli-
▶
ance.
a The appliance is ready to use.
a A default value appears in the display.
Switching off the appliance
Switch your appliance off when you are not using it. If
no settings are applied for an extended period, the ap-
pliance switches itself off automatically.
Turn the function selector to the off position.
▶
a The appliance stops any ongoing functions.
a The time appears in the display.
a Some displays also remain visible in the display
when the appliance has been switched off.
Setting the type of heating and temperature
Use the function selector to set the required type of
1.
heating.
a A default value appears in the display.
If necessary, change the settings. To do this, touch
2.
the appropriate field and use the rotary selector to
change the value.
Press ⁠ ⁠ .
3.
a The appliance starts.
lights up.
a
a With a type of heating with temperature, the temper-
ature display lights up gradually.
If necessary, use the rotary selector to change the
4.
temperature while the oven is in operation.
When the appliance is in operation, you cannot set
the temperature to 40 °C.
Pausing operation
You can pause operation at any time.
Press ⁠ ⁠ or open the appliance door.
1.
a Operation is paused.
flashes.
a
To continue operation, close the appliance door and
2.
press ⁠ ⁠ .
a Operation continues.
lights up.
a
Stopping operation
You can stop operation at any time.
After one hour, press ⁠
6.
Turn the function selector to the off position.
7.
a The appliance is cleaned.
a The appliance is switched off.
Cleaning the accessories
Clean the accessories thoroughly using soapy water
▶
and a soft cloth.
Turn the function selector to the off position.
▶
The fan may continue to run after operation has
been paused or stopped.
a The appliance stops any ongoing functions.
Rapid heating
To save time, you can shorten the preheat time for cer-
tain types of heating from a minimum temperature of
100 °C.
You can use rapid heating for the following types of
heating:
Hot air, exception: Hot air 40 °C
¡
Hot air grilling
¡
Configuring rapid heating
To ensure an even cooking result, do not place the ac-
cessory with the food in the cooking compartment until
rapid heating has finished. Do not set a cooking time
until rapid heating has finished.
Set a suitable type of heating and a temperature of
1.
at least 100 °C.
Press ⁠ ⁠ .
2.
lights up in the display.
a
Press ⁠ ⁠ .
3.
a Rapid heating starts.
a lights up.
a Once the set temperature has been reached, the
rapid heating process ends. A signal sounds and ⁠ ⁠
goes out in the display. Your appliance continues to
run with the set type of heating and temperature.
a Rapid heating is automatically deactivated within no
more than 15 minutes.
Cancelling rapid heating
Press ⁠ ⁠ .
▶
goes out in the display. Your appliance continues
a
to run with the set type of heating and temperature.
Safety switch-off function
For your safety, the appliance has a safety switch-off
function. The appliance is automatically switched off if it
has been in operation for an extended period.
How long the appliance waits before switching itself off
depends on the setting:
¡ Hot air 40 °C and preheating: 24 hours
¡ Hot air 100-230°C and hot air grilling: 5 hours
¡ Grill: 90 minutes
If the appliance has been switched off by the safety
switch-off function, ⁠ ⁠ ⁠ ⁠ is shown in the display. You can
confirm this message by pressing ⁠
Basic operation en
⁠ .
⁠ .
11