Table of Contents
Advertisement
2.
Press
.
a A message appears on the display confirming that
the initial start-up is complete.
Note: In the
→ "Basic settings", Page 13, specify whether or not
the display shows the time when the appliance is
switched off.
6 Basic operation
6.1 Switching on the appliance
▶
Press
to switch the appliance on.
a All of the touch fields light up red. The display
shows the Bosch logo, followed by the maximum
microwave output.
a The appliance is ready to use.
lights up red.
a
6.2 Switching off the appliance
▶
Press
to switch the appliance off.
a The appliance cancels the current functions.
a The display shows the time.
Note: Switch off your appliance when it is not being
used. If no settings are applied for an extended period,
the appliance switches itself off automatically.
6.3 Starting the operation
▶
Use
to start the operation.
a The display shows the settings.
a The display ring appears and shows the end of the
cooking time.
Note: If you open the appliance door during operation,
the appliance interrupts the operation and maintains
the set time left. When you want to restart the opera-
tion, close the appliance door and press .
5.2 Cleaning the appliance before using it
for the first time
Clean the cooking compartment and accessories be-
fore using the appliance to prepare food for the first
time.
1.
Make sure that there is no leftover packaging, ac-
cessories or other objects in the cooking compart-
ment.
2.
Clean the smooth surfaces in the cooking compart-
ment with a soft, damp cloth.
6.4 Interrupting the operation
1.
Press .
a The appliance interrupts the operation.
2.
Press
to delete all settings.
Note: When you open the appliance door, the appli-
ance interrupts the operation. After an operation is in-
terrupted or cancelled, the cooling fan may continue to
run.
6.5 Setting the operating mode
When you switch on the appliance, the display shows
the set default operating mode. You can start the sug-
gested operating mode immediately or set a different
operating mode.
1.
Press the field for the required operating mode.
2.
Use the control ring to change the highlighted selec-
tion.
If required, implement additional settings. To do this,
touch the relevant field and use the control ring to
change the value.
3.
Press .
a The appliance starts the operation.
Basic operation en
9
Advertisement
Table of Contents
