Top Cover - HP Pavilion DV7-3085 Maintenance And Service Manual

Removal and replacement procedures

Top cover

✎
The top cover kit includes TouchPad and cable, LED board and cable, and switch cover.
Description
For use only with white computer models equipped with a fingerprint reader; includes
fingerprint reader board
For use only with white computer models not equipped with a fingerprint reader
For use only with black computer models equipped with a fingerprint reader; includes
fingerprint reader board
For use only with black computer models not equipped with a fingerprint reader
Before removing the top cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Optical drive (see
b. Hard drive (see
c. TV tuner module (see
d. Switch cover and keyboard (see
e. Speaker assembly (see
f. Display assembly (see
Remove the top cover:
1. Turn the computer upside down, with the front toward you.
2. Remove the 3 Phillips 2.5×4.0 silver broadhead screws 1 and 11 Phillips PM2.5×7.0 screws 2 that secure the
top cover to the bottom of the computer.
4–34
"Battery" on page
"Optical drive" on page
"Hard drive" on page 4-11)
"TV tuner module" on page
"Switch cover and keyboard" on page
"Speaker assembly" on page
"Display assembly" on page
4-6).
4-7)
4-18)
4-23)
4-25)
Spare part number
516299-001
516360-001
519267-001
519268-001
4-19)
Maintenance and Service Guide