Power Button Board - HP Pavilion DV6-6090 Maintenance And Service Manual

Power button board

Description
Power button board (does not include cable)
NOTE: The power button board cable is not included in the power button board spare part kit. The
power button board cable is included in the Cable Kit, spare part number 640422-001.
Before removing the power button board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
●
Optical drive (see
●
Hard drive (see
●
Keyboard (see
●
Top cover (see
Remove the power button board:
1. Turn the top cover upside down, with the front toward you.
2. Release the power button board cable from the clip (1) built into the top cover.
3. Remove the three Phillips PM2.0×4.0 screws (2) that secure the power button board to the
top cover.
Battery on page 50), and then remove the following components:
Optical drive on page
Hard drive on page 54)
Keyboard on page 61)
Top cover on page 65)
51)
Component replacement procedures
Spare part number
640439-001
69