NordicTrack S10i User Manual page 14

13. Set the two Hand Weights (14) in the Hand
Weight Tray (38).
IMPORTANT: Make sure not to hit the
Console (10) with the Hand Weights (14)
when you set the Hand Weights in the Hand
Weight Tray (38) after each use.
14. Plug the appropriate Power Cord (120) into the
socket on the Frame (1).
Next, route the Power Cord (120) through the
two Anchored Zip Ties (55) on the Base (2) as
shown. Then, pull the Anchored Zip Ties closed.
15. After the studio cycle is assembled, inspect it to make sure that it is assembled correctly and that it
functions properly. Make sure that all parts are properly tightened before you use the studio cycle.
Extra parts may be included. Place a mat beneath the studio cycle to protect the floor.
13
14
38
14
1
55
2
14
10
120