MEGA-PIXEL NETWORK CAMERA
Installation Instructions
1. Locate the mounting template at the installation position and drill the ceiling
or wall if needed.
2. Open the dome cover by loosening screws(4x12mm). Use the torque wrench
supplied.
- Place the dome base unit on pre-drilled position and fix it through using
mounting screws (4x30mm).
- Route the power cable to the connecting place.
3. Set the camera's viewing angle.
4. Put the dome cover to the dome base unit and tighten the assembly screws.
Torque
Wrench
■ Optional Mounting Accessories
• Pole mount adaptor
• Surface mount
• Tilted junction mount
09
Mounting Screw
• Tilted mount
• Wall mount
(Requires additional
Surface mount)
Plastic Anchor
(6x30mm)
(4x30mm)