Display Assembly - HP Pavilion DM1z-3000 Maintenance And Service Manual

Display assembly

Description
29.5-cm (11.6-in) (1366 × 768) HD BrightView LED display assembly (includes webcam,
microphone, nameplate, and logo)
Verizon 29.5-cm (11.6-in) (1366 × 768) HD BrightView LED display assembly (includes
webcam, microphone, nameplate, and logo)
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation mode,
turn on the computer, and then shut it down using the operating system.
2. Disconnect all of the external devices that are connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the service cover (see
6. Remove the hard drive (see
7. Disconnect the wireless antenna cables from the WLAN module (see
on page
8. Remove the keyboard (see
9. Remove the top cover (see
Remove the display assembly:
1. Position the computer display-side up, with the front toward you.
2. Open the computer as far as possible.
3. Disconnect the display panel cable (1) from the system board.
52 Chapter 4 Removal and replacement procedures
Battery on page
Hard drive / Solid state drive on page
39) and WWAN module (see
Keyboard on page
Top cover on page
32).
Hard drive / Solid state drive on page
WWAN module on page
43).
46).
Spare part number
635308-001
639610-001
33).
33).
WLAN module
37).
ENWW