Navigating And Selecting In Setup Utility; Displaying System Information; Restoring Default Settings In Setup Utility - HP Pavilion DM1z-3000 Maintenance And Service Manual
Notebook pc
Hide thumbs
Also See for Pavilion DM1z-3000:
- Reference manual (82 pages) ,
- Getting started manual (67 pages)
Table of Contents
Advertisement
Navigating and selecting in Setup Utility
Because Setup Utility is not Windows based, it does not support the TouchPad. Navigation and
selection are by keystroke.
●
To choose a menu or a menu item, use the arrow keys.
●
To choose an item in a list or to toggle a field, for example an Enable/Disable field, use either the
arrow keys or
●
To select an item, press enter.
●
To close a text box or return to the menu display, press esc.
●
To display additional navigation and selection information while the Setup Utility is open, press
f1.
Displaying system information
The following procedure explains how to display system information in Setup Utility. If Setup Utility is
not open, begin at step 1. If Setup Utility is open, begin at step 2.
1.
Open Setup Utility by turning on or restarting the device, and then pressing
BIOS Setup Options" message is displayed in the lower-left corner of the screen.
2.
Select the Main menu. System information such as the system time and date, and identification
information about the device displays.
3.
To exit Setup Utility without changing any settings, use the arrow keys to select Exit > Exit
Discarding Changes, and then press enter.
Restoring default settings in Setup Utility
The following procedure explains how to restore Setup Utility default settings. If Setup Utility is not
already running, begin at step 1. If Setup Utility is already running, begin at step 2.
1.
Open Setup Utility by turning on or restarting the device, and then pressing
BIOS Setup Options" message is displayed in the lower-left corner of the screen.
2.
Use the arrow keys to select Exit > Load Setup Defaults, and then press enter.
3.
When the Setup Confirmation displays, press enter.
4.
To save your change and exit Setup Utility, use the arrow keys to select Exit > Exit Saving
Changes, and then press enter.
The Setup Utility default settings go into effect when the device restarts.
NOTE:
Your password, security, and language settings are not changed when you restore the
factory default settings.
68
Chapter 5 Computer Setup
f5
or f6.
f10
while the "F10 =
f10
while the "F10 =
ENWW
Hide quick links:
Advertisement
Table of Contents
