HP Pavilion DM1z-3000 Maintenance And Service Manual page 42

Description
●
500-GB, 7200-rpm
●
250-GB, 7200-rpm
Hard Drive Mounting Kit (includes mounting bracket and screws)
Solid state drive, 128-GB
Before removing the hard drive or solid state drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation mode,
turn on the computer, and then shut it down using the operating system.
2. Disconnect all of the external devices that are connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Remove the hard drive or solid state drive:
To remove the hard drive or solid state drive, follow these steps:
1. Save your work and shut down the computer.
2. Disconnect all of the external devices that are connected to the computer.
3. Unplug the power cord from the AC outlet, if necessary.
4. Turn the computer upside down on a flat surface and remove the battery.
5. Lift up at the two indentations (1) to remove the service cover (2).
34 Chapter 4 Removal and replacement procedures
Battery on page 32).
Spare part number
634919-001
634861-001
637177-001
635313-001
ENWW