HP Pavilion DM1z-3000 Maintenance And Service Manual page 57

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the service cover (see
6. Remove the hard drive (see
7. Remove the keyboard (see
8. Remove the top cover (see
NOTE: Before removing the TouchPad, it is necessary to remove the TouchPad button board
bracket.
Remove the TouchPad button board bracket:
To remove the TouchPad button board bracket, follow these steps:
1. Position the top cover upside down, with the front toward you.
2. Remove the four screws that secure the TouchPad button board bracket to the top cover (1).
3. Lift up and remove the TouchPad button board bracket (2).
Reverse this procedure to install the TouchPad button board bracket.
Remove the TouchPad button board:
To remove the TouchPad button board, follow these steps:
1. Remove the 2 screws that secure the TouchPad button board to the top cover (1).
2. Lift up and remove the TouchPad button board (2).
ENWW
Battery on page 32).
WLAN module on page
Hard drive / Solid state drive on page
Keyboard on page 43).
Top cover on page 46).
39).
33).
Component replacement procedures 49