Removing Or Installing The Rj45 Cover - HP Pavilion DM1z Getting Started Manual

Removing or installing the RJ45 cover

To remove the RJ45 cover:
1. Slide the RJ45 cover to the right (grasping the cover at the indentation on the left side) (1) in order
to release the cover.
2. Gently press the hinged bottom of the rubber tail and pull the RJ45 cover off of the computer (2).
To install the RJ45 cover:
1. Gently press the end of the rubber tail and insert the RJ45 cover into the computer (1).
2. Push on the edge of the RJ45 cover until it snaps into place (2).
44 Chapter 6 Maintenance