Managing Power Consumption; How The Computer Manages Power Automatically - HP OmniBook 6100 Reference Manual

Managing Power Consumption

Automatic action
Turns off hard disk.
Turns off the hard disk drive. This is usually
set to occur shortly after the display is turned
off.
Turns off display.
Turns off the display to conserve battery
power and extend the life of the display.
Enters Standby mode.
Maintains your current session in RAM, and
turns off the display and other components to
conserve battery power.
Enters Hibernate mode.
Saves your current session to the hard disk,
then turns off the computer.
Lowers CPU speed (SpeedStep only).
Switches to the lower CPU speed to use
power more efficiently. See below.
Batteries and Power Management
Managing Power Consumption
When you're running your computer on battery power, you will want to maximize
operating time without compromising performance. Your computer is designed to help
you reduce power consumption and extend battery life without needing to turn it off.
• During idle periods, the computer automatically enters power-saving modes after
specified timeout periods. You can adjust these timeouts to suit your working habits.
• You can manually send the computer into a power-saving mode at any time by
pressing the appropriate key—see "To manage power manually" on page 53.

How the computer manages power automatically

Your computer automatically enters Hibernate mode and Standby mode, and turns off the
hard disk and display based on values set in Power Options or Power Management in
Control Panel or in the BIOS Setup utility.
50 Reference Guide
Occurs after...
The hard disk is not accessed
for the specified interval.
No keyboard, pointing device, or
other input activity occurs for the
specified interval.
No pointing devices are used,
no disk drive is accessed, and
no port (serial, parallel, or IR) is
active for the specified interval.
The computer stays in Standby
mode for the specified interval.
The AC adapter is unplugged.
To resume...
Begin using the computer:
the hard disk turns on when
needed.
Press any key or move a
pointing device to turn on
the display.
Press the blue sleep button
to return to your current
session.
Press the blue sleep button
to restore your previous
session.
Plug in the AC adapter.