Adjusting The Screen Viewing Angle; Adjusting The Volume; Lowering Volume Quickly; Common Operations - Alpine X009-FD2 Quick Reference Manual

3
Touch [Close], or press any button.
• If the disc does not eject after touching [c Disc], press and hold
c (Eject) for at least 5 seconds.
• Do not apply shock to the monitor when it is open as it may result in
malfunction of the unit.
• The monitor will stop at the set tilt angle when closing.
CAUTION
Keep hands (or any other object) away from the monitor while it
is opening or closing to avoid damage or injury. The back of the
monitor tends to become very warm under normal operating
conditions. This is not a malfunction, but care should be taken to
avoid prolonged contact with it.

Adjusting the Screen Viewing Angle

Adjust the screen's angle for better visibility.
1
Press c (Eject).
The Open/Tilt screen is displayed.
2
Touch [ Up] or [ Down] of "Tilt" to adjust the
desired screen angle.
The screen angle can be adjusted in 5 stages.
3
Touch [ ] to return to the normal mode.
• The screen color will vary when viewed at certain angles. Adjust the
screen angle for the best viewing position.
• If the voltage of the vehicle's battery power is low, the screen may
blink when the screen angle is changed. This is normal and not a
malfunction.

Adjusting the Volume

Adjust the volume by pressing
Volume decreases/increases continuously by pressing and
holding or .
Volume: 0 - 35

Lowering Volume Quickly

Activating the Audio Mute function will instantly lower the volume
level by 20 dB.
1
Press to activate the MUTE mode.
The audio level will decrease by about 20 dB.
2
Pressing again will bring the audio back to its
previous level.
20
-EN
or .

Common Operations

Using My Favorites

Display example of My Favorites screen
User name: Displays the name of the user
My Favorites icon: Touching an icon on My Favorites
screen will switch to the screen for the selected
application
Add button: Use to add (register) My Favorites icons
(page 22)
Edit button: Use to edit My Favorites (page 22)
Camera button: Use to display the camera image
(page 23)
Notification List button: Use to display the Notification
List from Facebook in the connected Smartphone via
this unit (page 25)
i-Personalize button: Use to configure the i-Personalize
Setup (page 23)