1. Press the button on the face of the CD-ROM drive.
2. If you are using this drive for the first time, be sure to remove the cardboard
packing insert.
3. Place the CD into the drive (label facing up) and gently press down to seat the
CD on the spindle.
–or–
Remove the CD.
4. Slide the CD-ROM tray back into the module to close it.
If the CD-ROM drive has no power and you need to remove a CD from it, you can
manually open the CD-ROM drive by inserting a straightened paper clip into the
recessed hole (as shown above).
Connecting External Devices
To connect an external monitor.
To connect a printer or other parallel device.
To connect a serial mouse or other serial device.
To connect an external PS/2 keyboard or a PS/2 mouse.
To connect a universal serial bus device.
To connect an audio source, a microphone, or headphones.
To connect a television.
To make an infrared connection.
To connect an external monitor
1. From the Start menu, shut down the OmniBook.
30