To Configure Pointing Devices; Using The Omnibook Display; To Adjust The Display; To Extend The Life Of The Display - HP OmniBook 7100 User Manual

3. Select the System Devices menu.
4. Highlight Internal Pointing Devices and select Pointing Stick. (Choose Both if
you want basic touch pad features available.)
5. Press F10 to save and exit.
Install pointing stick support
From Control Panel, open Mouse, General and change the mouse type--click
Have Disk and point to the directory listed below and select PS/2 TrackPoint.
For Windows 95
c:\omnibook\drivers\win95\trackpnt.
For Windows NT 4.0
c:\omnibook\drivers\nt40\ trackpnt.

To configure pointing devices

To customize the operation of all pointing devices (pointing stick, touch pad, and
external PS/2 or serial mouse), use the Windows Control Panel Mouse icon to
access Mouse Properties. You can change left and right button actions, double-
click speed, pointer speed and tail, and more.
To customize special pointing stick features, click the pointing stick icon on the
taskbar or open TrackPoint in Control Panel.

Using the OmniBook Display

To adjust the display.

To extend the life of the display.

To adjust the display
The OmniBook uses special key combinations, called
Press Fn+F1 to decrease the brightness.
Press Fn+F2 to increase the brightness.
Hint
Brightness affects battery life. To maximize your battery operating time, set the
brightness to the lowest comfortable setting, so that the internal light uses less
power.
To extend the life of the display
Observe the following guidelines to extend the life of the backlight in the OmniBook
display.
Set the brightness to the lowest comfortable setting (Fn+F1).
hot keys, to control brightness.
15