Table of Contents
Advertisement
Operating Instructions
Operating Instructions
(continued)
NOTE:
1. Before entering TIMER setting, make sure power is being supplied to the unit.
2. Before entering TIMER setting, make sure pressing HUMIDITY
7. To shut the unit down, press the ON/OFF button.
Note: After a power outage, the unit will memorize the last setting and return the unit to the same setting once power is restored.
Fault Codes
1. If the display reads "AS" or "ES" , a sensor has failed. Contact your Authorized Frigidaire Service Center.
2.If the display reads "EC" , check the following operating conditions. Outlet voltage should be 115V±10% and the
surrounding temperature should be with in the range of 41 °F to 96 °F. Unplug the unit and plug it in again under
normal operating conditions. If the "EC" code persists, contact your Authorized Frigidaire Service Center.
6
2009 Electrolux Home Products, Inc.
or
button sets one desired room humidity first.
All rights reserved.
Advertisement
Table of Contents
