HP Mini 5101 User Manual page 87

Press fn+f1 to initiate Sleep.
When Sleep is initiated, your information is stored in system memory, the screen is cleared, and power
is conserved. While the computer is in the Sleep state, the power lights blink.
The computer must be on before you can initiate Sleep.
NOTE: If a critical battery level occurs while the computer is in the Sleep state, the computer initiates
Hibernation and the information stored in memory is saved to the hard drive. The factory setting for
critical battery action is Hibernate, but this setting can be changed using Power Options in Windows
Control Panel.
To exit Sleep, briefly slide the power switch or press any key on the keyboard.
The function of the fn+f1
Hibernation instead of Sleep.
NOTE: In all Windows operating system windows, references to the sleep button apply to the
hotkey.
hotkey can be changed. For example, you can set the fn+f1 hotkey to initiate
fn+f1
Using the keyboard 77