System Configuration Menu; Diagnostics Menu - HP Mini 210-2100 Maintenance And Service Manual

System Configuration Menu

Select
Language Support
Fan always on
Action keys mode
Boot Options

Diagnostics Menu

Select
Hard Disk Self Test (select models only)
Memory Test
76 Chapter 5 Setup Utility
To do this
Select the display language for the Setup Utility.
Enable/disable fan always on.
Enable/disable action keys.
Set boot order, device boot capability, and accessibility
options:
● POST Hotkey Delay (sec)―Set the delay for the
and f12 functions of Setup Utility in intervals of 5
seconds each (0, 5, 10, 15, 20).
●
HP QuickWeb (select models only) ―Enable/disable
the QuickWeb Boot menu in Setup Utility.
●
Delay to boot Windows―Disable, or set delay to 5, 10,
15, or 30 seconds.
● Floppy boot―Enable/disable during boot time.
● Internal Network Adapter boot―Enable/disable internal
network adapter boot.
●
Boot order―Set the order in which the system searches
for a boot disk:
◦
Notebook hard drive
◦
USB diskette-on-key/lUSB hard drive
◦ USB CD/DVD ROM drive
◦ USB Floppy
◦
Network adapter
NOTE: Only devices connected to the system
will appear in the boot order menu.
To change the order of boot devices, press the Up
or Down arrow to select a device. Then press
move the device up in the list or
device down in the list.
To do this
Run a comprehensive self-test on the hard drive.
Run a diagnostic test on the system memory.
f10
f5 to
f6 to move the