Table of Contents
Advertisement
Description
Hard drive:
250-GB, 5400-RPM
Before removing a hard drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the service cover (see
Remove the hard drive:
1.
Lift up the vinyl cover to expose the hard drive.
2.
Using a small Phillips screwdriver, remove the 4 hard drive mounting screws.
Battery on page
34).
Battery on page
34).
Spare part number
608763–001
Component replacement procedures
37
Advertisement
Table of Contents
