Set Voicemail Number; Retrieve Voicemail Messages - VTech DS6752-4 Manual

Built-in answering system and voicemail
This telephone has a built-in answering system which can be used without any
service subscription.
This telephone also supports voicemail feature which requires subscription from
your telephone service provider. Contact your telephone service provider for details.
To configure some common settings for the answering system
Record your own announcement
You can use the preset announcement to answer calls, or replace it with your own
recorded announcement. The announcement can be up to 90 seconds in length.
Press MENU when the phone is not in use.
.
Scroll to Answering sys, then press SELECT twice.
2.
The system announces, "To play, press 2. To record, press 7." Then press 7
3.
to record.
The system announces, "Record after the tone. Press 5 when you are done."
4.
After the tone, speak towards the microphone.
Press 5 when done.
5.
Set number of rings
You can set the answering system to answer an incoming call after two, three,
four, five or six rings; or toll saver. If you choose toll saver, the answering system
answers a call after two rings when you have new messages, or after four rings
when you have no new messages.
Press MENU when the phone is not in use.
.
2. Scroll to Answering sys, then press SELECT.
Scroll to Ans sys setup, then press SELECT.
3.
4. Scroll to # of rings, then press SELECT.
Scroll to 6, 5, 4, 3, 2 or Toll saver and then press SELECT.
5.
To configure the voicemail number and retrieve voicemail messages
You can save the voicemail number to
base for easy access. Contact your telephone service provider for more information
and assistance about using your voicemail service.

Set voicemail number:

. Press MENU when the phone is not in use.
2. Scroll to Settings, then press SELECT.
3. Scroll to Voicemail # , then p ress SELECT.
4. Enter the voicemail number.
Press DELETE to erase a digit.
•
Press and hold DELETE to erase all digits.
•
• Press or
Press and hold PAUSE to insert a dialing pause (a P appears).
•
Press TONE
•
5. Press SELECT.

Retrieve voicemail messages:

Press and hold
Bluetooth
Pair and connect your first Bluetooth cell phone
To use a Bluetooth enabled cell phone with your DS6751, you must first pair and
connect your Bluetooth cell phone(s) with the telephone base. All DS6751 handsets
can be used to make or answer calls on the cell line.
1 /
. Press
base screen displays Pairing D1... and the
2. Turn on the Bluetooth feature of your cell phone. Once your cell phone finds your
VTech phone (VTech DS6751), press the appropriate key on your cell phone to
continue the pairing process.
• Your cell phone may prompt you to enter the PIN of the telephone base. The
default PIN of the telephone base is 0000.
to move the cursor to the left or right.
( appears) or QUIET
to add
1.
2 on the telephone base. You hear two beeps. The telephone
1 on each handset and the telephone
#
to add
1 device light blinks.
6
#
( appears).