Get Started; Install Battery - VTech DS6752-4 Manual

Get started

Connect the telephone base and handset charger
Click!
DSL filter
• Use only the power adapters and batteries supplied with this product.
To order replacements, visit our website at www.vtechphones.com or call
1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call
1 (800) 267-7377.
• Even if you do not subscribe to any conventional telephone service, you can still
use the cell line alone without plugging in a telephone line cord.
• If you subscribe to telephone service from a cable company or a VoIP service
provider, contact your cable/VoIP service provider for more information.

Install battery


Plug!
Battery Pack / Bloc-piles :
WARNING / AVERTISSEMENT :
DO NOT BURN OR PUNCTURE BATTERIES.
NE PAS INCINÉRER OU PERCER LES PILES.
Made in China / Fabriqué en chine
IMPORTANT:
/HOME to check for a dial tone. If you hear a dial tone, the installation is successful.
Press
If you do not hear a dial tone:
• Make sure the installation procedures described above are properly done.
• It may be a wiring problem. If you have changed your telephone service to digital service
from a cable company or a VoIP service provider, the telephone line may need to be
rewired to allow all existing telephone jacks to work. Contact your cable/VoIP service
provider for more information.
Charge your phone
The battery icon
• Animates when the battery is charging.
• Flashes when the battery is low and
needs charging.
• Becomes solid when the battery is
fully charged.
Charge for at least 30 minutes before initial settings.
Charge for 11 hours before initial use.
Configure your phone
Set date and time
. Press MENU when the telephone base/handset is not in use.
Scroll to Set date/time, then press SELECT.
2.
3. Enter the month (MM), date (DD) and year (YY), then press SELECT.
Enter the hour (HH) and minute (MM). Then scroll to AM or PM.
4.
Press SELECT.
5.
If you subscribe to caller ID service, the day, month and time are set automatically
with each incoming call.
TEL. LINE
Plug!
Use Only
Click!
Supplied Adapter
2
THIS SIDE UP / CE CÔTÉ VERS LE HAUT
(2.4V Ni-MH)
Plug!
3
Click!
Light on!
3
Plug!
4