Appendix F Specifications; Input Power; Dc Plug Of External Hp Power Supply - HP Folio 13-1020 User Manual

F Specifications

Input power

The power information in this section may be helpful if you plan to travel internationally with the
computer.
The computer operates on DC power, which can be supplied by an AC or a DC power source. The
AC power source must be rated at 100–240 V, 50–60 Hz. Although the computer can be powered
from a standalone DC power source, it should be powered only with an AC adapter or a DC power
source supplied and approved by HP for use with this computer.
The computer can operate on DC power within the following specifications.
Input power
Operating voltage and current

DC plug of external HP power supply

NOTE: This product is designed for IT power systems in Norway with phase-to-phase voltage not
exceeding 240 V rms.
NOTE: The computer operating voltage and current can be found on the system regulatory label.
Rating
18.5 V dc @ 3.5 A - 65 W
Input power 71