Getting Started - kinetic T-6200 Manual

GETTING STARTED

1. ASSEMBLE TRAINER AND MOUNT BIKE
2. DOWNLOAD KINETIC FIT APP (www.kinetic.fit)
3. CREATE A USER ACCOUNT AND PROFILE
4. PLUG IN TRAINER AND PAIR TO KINETIC FIT APP
5. FOLLOW INSTRUCTIONS AND BEGIN TRAINING
Kinetic Fit Power Training App
FREE 6-month subscription with a Smart Control purchase
FCC ID: QOQBLE113 MIC: 007-AB0103
IC: 5123A-BGTBLE113 KCC-CRM-BGT-BLE113
ASSEMBLY
1
Insert leg extension and tighten firmly with supplied allen wrench.
Repeat for the other side.
3
Place washer on tensioning knob and insert through resistance unit.
Add curved washer and spring on the inside of the resistance unit.
Page 2
Bluetooth QD ID: B021015
www.kurtkinetic.com
IN THE BOX
Frame
Mounting
hardware
Resistance
unit
2
Attach resistance unit to frame with mounting bolt as shown.
4
Thread tensioning knob into crossbar and tighten several turns.
When unpacking, check that the
following components are present
Leg extenders
4mm hex key
Skewer
Power
cord