Getting Started - kinetic T-2710 Manual

GETTING STARTED

Getting Started With Training Apps
Kinetic Smart 2 fluid trainers connect to training apps and send speed, cadence, power data and more. Check
on each app web site to learn how to connect your trainer. Our partner apps all offer iOS and Android versions
to connect directly with Kinetic Smart 2 trainers via Bluetooth Smart. Kinetic Smart 2 trainers can also send
data directly to Garmin™ devices via ANT+.
1. Assemble trainer, install battery and mount bike
2. Download Kinetic Fit app at: www.kinetic.fit
3. Create user account and profile
4. Spin wheel on trainer to wake up trainer sensor
5. Select SENSORS in kinetic fit app and pair trainer.
Activate 1-month free trial when pop up appears.
6. Update firmware if indicated
7. Select a workout and start training
IN THE BOX
Frame
Mounting
hardware
2
Place washer on tensioning knob and insert through resistance unit.
Add curved washer and spring on the inside of the resistance unit.
Page 2
Find the newest instructions and videos: kurtkinetic.com/support
Training in other apps
1. Complete steps 1 - 6 at left to see if firmware
2. Download preferred 3rd-party partner app or
3. Activate trial subscription
4. Pair trainer with app and follow directions to ride
Apple and the Apple logo are trademarks of Apple Inc.,
registered in the U.S. and other countries. App Store is a
service mark of Apple Inc.
When unpacking, check that the
following components are present
Resistance unit
Skewer
www.kurtkinetic.com
updates are indicated via Kinetic Fit app.
another compatible app.
ASSEMBLY
1
Attach resistance unit to frame with mounting bolt as shown.
3
Thread tensioning knob into crossbar and tighten several turns.
Kinetic Fit Zwift
kinetic.fit zwift.com
TrainerRoad Rouvy
trainerroad.com
rouvy.com
FulGaz
Kinomap
kinomap.com fulgaz.com