Connecting To A Local Area Network (Lan) - HP Envy 15-1050 User Manual

Connecting to a local area network (LAN)

Connecting to a local area network (LAN) requires an 8-pin, RJ-45 network cable (purchased
separately). If the network cable contains noise suppression circuitry (1), which prevents interference
from TV and radio reception, orient the circuitry end of the cable (2) toward the computer.
To connect to a LAN:
1. Plug the network cable into the network jack (1) on the computer.
2. Plug the other end of the network cable into a network wall jack (2).
WARNING!
cable or telephone cable into an RJ-45 (network) jack.
22 Chapter 3 Wireless and local area network
To reduce the risk of electric shock, fire, or damage to the equipment, do not plug a modem