Using An Esata Device; Connecting An Esata Device; Removing An Esata Device - HP Envy 15-1050 User Manual

To remove a USB device:
1. Click the Safely Remove Hardware and Eject Media icon in the notification area, at the far right
of the taskbar.
NOTE:
icons icon (the arrow at the left of the notification area).
2. Click the name of the device in the list.
NOTE:
3. Remove the device.

Using an eSATA device

An eSATA port connects an optional high-performance eSATA component, such as an eSATA external
hard drive.
Some eSATA devices may require additional support software, which is usually included with the device.
For more information about device-specific software, refer to the manufacturer's instructions.
NOTE: The eSATA port also supports an optional USB device.

Connecting an eSATA device

CAUTION:
device.
To connect an eSATA device to the computer, connect the eSATA cable for the device to the
▲
eSATA port.
You will hear a sound when the device has been detected.

Removing an eSATA device

CAUTION:
safely remove the device.
To display the Safely Remove Hardware and Eject Media icon, click the Show hidden
You are prompted that it is safe to remove the hardware device.
To prevent damage to an eSATA port connector, use minimal force to connect an eSATA
To prevent loss of information or an unresponsive system, use the following procedure to
External devices 67