Step 4. Testing The Scanner; Uninstalling The Plustek Device Driver And Software - Plustek SecureScan X-Mini User Manual

S t e p 4 . T e s t i n g
S t e p 4 . T e s t i n
The following test procedure checks to see if the scanner is properly functioning
with your computer and the scanning software. Before testing your scanner, double
check to make sure that all connections are securely fastened.
To properly test your scanner, please perform the following steps:
1. Double-click the
window.
2. Select the correct Model name from the drop-down list. Choose the alignment
method Left-aligned. Select Recognition from the Application drop-down
list to scan image and recognize document data. Click the OK button to
complete the settings.
3. Open the cover and place the passport or ID card face-down on the scanner
glass. Align the passport or ID card along with the alignment bar. Gently close
the cover. (For X-Cube & X-Mini: Just place the passport or ID card face-down
on the scanner glass. Align the passport or ID card along with the alignment
bar.)
4. The scanner starts to scan immediately. After the scanning process is
completed, the scanner will beep once and the scan indicator will blink once.
The scanned image will display on the screen.
Uninstalling the Plustek device driver and
software
To uninstall your existing Plustek driver and software, please follow the steps
below:
1. From the Windows START menu, point to All Programs > Your Scanner
Model Name , and the click Uninstall (Your Scanner Model Name) .
(For Windows 8 users: Point your mouse cursor to the upper or lower right
corner of your screen to open the Charm bar. Click on the Start charm, then
click on the downwards arrow button in the lower left corner of the screen. The
Apps screen will be shown. Move your cursor to the right edge of the screen
to scroll right until you find Your Scanner Model Name , and then click on
t h e S c a n n e r
g t h e S c a n n e r
SecureScan icon in the system tray to display the main
22