Plustek SecureScan X-Mini User Manual page 21

X150
Attention
1. Plug the AC adapter into the scanner's power receptor.
2. Plug the other end of the power cable into a standard AC power outlet.
3. Plug the square end of the included USB cable to the USB port at the rear of the
scanner.
4. Plug the rectangular end of the USB cable to an available USB port on your
computer.
5. If you plan to connect your scanner to a USB hub
connected to the USB port in your computer. Next, connect the scanner to the USB
hub.
6. Switch the scanner power on.
6
The USB hub is not included with the scanner.
Please make sure the scanner is turned OFF
before you plug or unplug the scanner power
adapter.
18
6
, make sure that the hub is