9.
Release the webcam cable (when applicable) and the wireless antenna cables from the clips (3)
built into the top cover.
CAUTION:
support the display assembly can result in damage to the display assembly and other device
components.
NOTE:
cable (1) and wireless antenna cables are securely routed through the clips (2) and routing
channels built into the base enclosure.
10.
Remove the two Torx T8M2.5×8.0 screws (1) that secure the display assembly to the computer.
76
Chapter 4 Removal and replacement procedures
Support the display assembly when removing the following screws. Failure to
When installing the display assembly, be sure the grounded sections of the webcam
ENWW