Table of Contents
Advertisement
3.
Slide the graphics board (3) back at an angle.
4.
Remove the graphics board.
Reverse this procedure to install the graphics board.
Processor heat sink
Description
For use only with computer models equipped with Quad Core processors
For use only with computer models equipped with Dual Core processors
Before removing the processor heat sink, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
a.
Keyboard (see
b.
Switch cover (see
c.
Graphics board heat sink (see
ENWW
Battery on page
46), and then remove the following components:
Keyboard on page
61)
Switch cover on page
Graphics board heat sink on page
65)
Component replacement procedures
Spare part number
597570-001
596048-001
67)
71
- Quick Links:
- Primary Hard Drive
- Keyboard
Hide quick links:
Advertisement
Table of Contents
