Identifying The Accessory Battery Components; Inserting Or Removing An Accessory Battery - HP Envy 13-1007 User Manual

Identifying the accessory battery components

Component
(1) Battery fuel gauge
(2) Battery charge lights
(3) Battery release latches

Inserting or removing an accessory battery

CAUTION:
loss of information, save your work before removing the battery.
NOTE: It is not necessary to turn off the computer before inserting or removing the accessory battery.
Removing a battery that is the sole power source can cause loss of information. To prevent
Description
When pressed, the battery fuel gauge checks the amount of
available battery charge.
Show the percentage of available battery power.
●
Blinking: The accessory battery has reached a low battery
level.
● One light on: The accessory battery has 25 percent remaining
battery charge.
●
Two lights on: The accessory battery has 50 percent remaining
battery charge.
●
Three lights on: The accessory battery has 75 percent
remaining battery charge.
● Four lights on: The accessory battery is fully charged.
Release the battery from the bottom of the computer.
Using battery power 49