Table of Contents
Advertisement
3-2. Selecting a suitable
location
3-3. Connecting the
monitor
L50C
15" TFT LCD Color Monitor
•
Place the monitor at least 30cm from other electrical or heat-emitting
equipment and allow at least 10cm on each side for ventilation.
•
Place the monitor in a position where no light shines directly onto or is
reflected on the screen.
•
To reduce eye strain, avoid installing the display unit against a bright
background such as a window.
•
Position the monitor so that the top of the screen is no higher than eye level.
•
Position the monitor directly in front of you at a comfortable reading distance
(around 45 to 90cm)
Before you start cabling your monitor, check that the
! !
power is off on all units. To avoid any possibility of
electric shock, always connect your equipment to
properly earthed outlets.
1.
Insert the other 15-pin signal cable connector into the 15-pin VGA connection
on your computer and screw it down.
2.
Plug the power cord connection to connection on the AC-DC Power adapter.
3.
Plug the jack of the AC-DC Power adapter connection to connection on monitor.
4.
Plug the other end of the power cord to your computer's main supply or to a
100V-240V earthed electrical outlet.
5.
Turn on the monitor using the power switch and check that the power LED is
on. If not, repeat steps 1,2,3 and 4 or refer to the Troubleshooting section of
this guide.
BACK
NEXT
5/17
Advertisement
Table of Contents
