Fastening The Swivel And Tilt Base; Selecting A Suitable Location - Hyundai ImageQuest ImageFlat F791 User Manual

Mutiscanning color monitor
Table of Contents

Advertisement

3-2. Fastening the swivel
and tilt base
3-3. Selecting a suitable
location
F791
ImageFlat Color Monitor
Place the base against the bottom of the monitor so that the base fasteners are
aligned with appropriate slots.
Push the base towards the front of the monitor until the latch locks into
position.
Place the monitor at least 30cm from other electrical or heat-emitting
equipment and allow at least 10cm on each side for ventilation.
Place the monitor in a position where no light shines directly onto or is
reflected on the screen.
To reduce eye strain, avoid installing the display unit against a bright
background such as a window.
Position the monitor so that the top of the screen is no higher than eye level.
Position the monitor directly in front of you at a comfortable reading distance
(around 45 to 90cm)
4/19

Advertisement

Table of Contents
loading

This manual is also suitable for:

C17f06091C17r07072

Table of Contents