Problem Solver - Monogram Advantium ZSC2202J3SS Owner's Manual

Questions?
Use this
problem
solver
Problem
DISPLAY
The display is blank
"Control is LOCKED"
appears in display
Control display is
lit but oven will not
start
OTHER PROBLEMS
The door and inside
of the oven feels hot
Oven will not start
Possible Causes
The control has been locked.
Clock is not set.
Door not securely closed.
START/PAUSE pad not pressed
after entering cooking selection.
Another selection already
entered in oven and CANCEL/
OFF pad not pressed to cancel
it.
Size, quantity, or cooking time
not entered after final selection.
CANCEL/OFF was pressed
accidentally.
The heat lamps produce intense
heatin a small space.
A fuse in your home may be
blown or the circuit breaker
tripped.
Troubleshooting
Built-In Advantium Oven
What To Do/Explanation
The clock is designed to turn off
when unit is idle for 30 seconds
to minimize the standby power
usage. (See Clock section)
Press and hold CANCEL/OFF for
5 seconds to unlock the control.
Set the clock.
Open the door and close
securely.
Press START/PAUSE.
Press CANCEL/OFF.
Make sure you have entered
cooking time after selecting.
Reset cooking program and
press START/PAUSE.
This is normal. Use oven mitts to
remove food when when ready.
Replace fuse or reset circuit
breaker.
35